Thursday, June 05, 2008

Digital model railroading for real now

The Intellibox and transformer finally arrived after many shipping delays. After dinner I set up a little bit of track on the dining table and connected everything. My only digital loco BR86 was used as guinea pig. Low and behold, as soon as I set it on the track it ran. It still remembered the speed setting from the store when I tried it out. With some trial and error I figured out the loco address, and was able to control all functions from the Intellibox with minimal fuss. The one irritating thing is that the speed steps are extremely coarse. At step 1 the loco creeps along, step 2 it moves ok, step 3 it feels like full speed, but there are 14 steps total. I need to find a way to reprogram the speed range on this decoder. Looks like it's a fairly new Marklin mfx decoder, which is not supported for programming on the Intellibox. Bummer.

Speaking of which, the connector on the Marklin transformer I got is amazingly whimpy and easily slips out. Not very convincing.

Mit viel Verspaetung kamen heute die Intellibox und der Trafo an. Gleich nach dem Abendessen habe ich alles angeschlossen, etwas Schienen aufgebaut, und die BR86 als Versuchsschweinchen auf das Gleis gesetzt. Zu meiner Ueberraschung fuhr sie auch gleich los. Sie hatte noch die Geschwindigkeit und Richtung gespeichert von als ich sie im Laden ausprobiert hatte. Mit etwas Rumprobieren bekam ich die Adresse des Dekoders heraus und konnte die Lok problemlos mit allen Sonderfunktionen steuern. Das einzige Problem ist dass die Geschwindigkeitsstufen des Dekoders zu grob sind. Bei Stufe 1 kriecht die Lok. Mit Stufe 2 geht's ganz gut, Stufe 3 wird schon recht schnell, insgesamt hat die Lok aber 14 Stufen... Das muss ich noch in Ordnung bringen. Die Intellibox understuetzt aber nicht das Umprogrammieren von mfx Dekodern. Mal sehen...

Der Stromstecker an dem Maerklintrafo rutscht sehr leicht ab, und ist erstaunlich instabil. Nicht ueberzeugend.

No comments: